Your browser is outdated. Upgrade to a modern browser to better experience this site.

Curved Piecing

There are many traditional quilt blocks and free-form designs that use curves. Like many other quilting techniques, a few tips and a little practice will make curved piecing less of a struggle and open up your design choices.
Careful cutting and marking of curved pieces is critical to having a smooth curved seam. Curved seams are bias edges and will stretch easily without careful handling. Never tug when cutting and sewing and use a dry iron to press, not iron, curved seams into place.

Curves with Templates

1. Make templates from template plastic or freezer paper for traditional blocks. You can also purchase acrylic templates for most common curved shapes in different sizes. Or, use a die-cut system to cut multiple shapes accurately.

2. Be sure to follow the template as closely as possible when cutting pieces. If using a rotary blade, use the smallest rotary blade size available to easily negotiate the curves. If using scissors, trace the template shape onto the fabric and then cut. Note:If the template is freezer paper, cut as closely as possible to the template edge.  Be sure your scissors are sharp.

3. Find the centers of both the convex (outer curve, piece B in Figure A) and concave (inner curve, piece A in Figure A) edges by folding the pieces in half, finger-press and mark with a pin or cut a notch. Purchased templates and die-cut pieces should have center notches. Match the centers and pin with the convex curve on the top referring to the Drunkard's Path block in Figure A.
Curved Piecing
4. Match and pin the seam ends. Then pin liberally between the seam ends and center, matching the seam edges and referring again to Figure A.

5. Slowly stitch pieces together an inch or two at a time, removing pins and keeping seam edges even.

After completing the stitching, clip only the concave (inner) seam allowance if necessary. Press seam allowances flat toward the concave (inner) curve (Figure B).

Curved Piecing
Curved Piecing
Common traditional blocks like Apple Core and Rob Peter to Pay Paul are constructed in the same manner.

Curved Piecing
Curves without Templates

1. To make gentle curves without templates, overlap two pieces of fabric right sides up (Figure C1). Cut a gentle curve with a rotary cutter through both layers of fabric (Figure C2). Discard the fabric remnants (Figure C3). Note:You can cut a single curve as shown here or an undulating curve as shown in Figure D. Just keep the curves gentle and shallow.

Curved Piecing
2. For single or undulating curves, mark across the cut pieces with curved edges matching (Figure D). Make shallow clips in the concave areas referring again to Figure D.

Curved Piecing
3. Pin the curved edges together matching the marks (Figure E). Slowly stitch pieces together an inch or two at a time, removing pins and keeping seam edges even.

Curved Piecing
Curved Piecing
Free-form quilter's use single and undulating curves to add movement or a landscape feel to their quilts.

Curved Piecing
Learn